What the result represents
The model assumes steady, complete mixing with no fan work, pressure drop or heat exchange across the mixing section. It treats inlet moisture as vapour. It can estimate the amount of water converted to a condensed phase at equilibrium. The fraction suspended as fog, deposited on a surface, carried into a coil or collected at a drain depends on the installation.
Measurements taken across a stratified section can differ from the ideal outlet. A single sensor downstream of outdoor and return dampers can miss local cold spots, even where the reported mixed temperature is above freezing.
Before using a result
Check the input units and measurement locations, verify whether airflow is actual or standardized, and use local absolute pressure. Before relying on any result for any purpose, independently verify the inputs, methods, outputs and suitability for the application against relevant conditions, standards and manufacturer data. Never use the result as the sole basis for selection, design, procurement, installation, operation or compliance; obtain qualified review where appropriate or required. The presets illustrate the method and do not establish project design conditions.
The calculation method identifies the balances, property model and limits. The PsychroHub Terms of Use include warranty exclusions and liability limitations; see also the PsychroMix limitations. Review them before calculating.